3
Double Coated Tapes
with Adhesive 700 Series
9443NP • 9589
Technical Data
Product
Description
July, 2006
3M™ Double Coated Tapes with 3M™ Adhesive 700 Series feature a high tack synthetic
rubber adhesive which provides excellent quick stick or initial adhesion and bonds together a
wide variety of materials such as metals, papers, paints and most plastics. These tapes have a
film carrier, which can add dimensional stability for aid in removal and also provides easier
handling during slitting and die-cutting.
Product
Faceside1
Adhesive
Type/
Thickness
3M™ Double
Coated Tape
9443NP
3M™ Double
Coated Tape
9589
Construction
Carrier
Type/
Thickness
Backside2
Adhesive
Type/
Thickness
Liner Color/
Type/Print
Tape
Caliper
760/
0.002 in.
(0.051 mm)
0.002 in.
(0.051 mm)
HDPE3
760/
0.002 in.
(0.051 mm)
Green plaid, 60#
Densified Kraft,
no print
0.006 in.
(0.15 mm)
0.004 in. Clear
(0.10 mm)
760/
0.003 in.
(0.076 mm)
0.003 in.
(0.076 mm)
HDPE3
760/
0.003 in.
(0.076 mm)
Green plaid, 60#
Densified Kraft,
no print
0.009 in.
(0.23 mm)
0.004 in. White
(0.10 mm)
Note 1: Faceside adhesive is on the interior of the roll, exposed when unwound.
Note 2: Backside adhesive is on the exterior of the roll, exposed when liner is removed.
Note 3: HDPE (High Density Polyethylene).
Liner
Caliper
Tape
Color
3M™ Double Coated Tapes with Adhesive 700 Series
9443NP • 9589
Typical Physical
Properties and
Performance
Characteristics
Note: The following technical information and data should be considered representative or
typical only and should not be used for specification purposes.
3M™ Double
Coated Tape
9443NP
3M™ Double
Coated Tape
9589
Oz./in.
(N/100 mm)
Oz./in.
(N/100 mm)
- 15 minute RT
93 (101)
81 (88)
- 72 hour RT
97 (106)
84 (92)
- 72 hour 158°F (70°C)
126 (137)
87 (94)
206 (224)
117 (127)
Polyester
89 (97)
82 (89)
Polypropylene
85 (93)
62 (67)
Polycarbonate
101 (110)
101 (110)
1000 grams at 72°F (22°C)
10,000 min.
10,000 min.
500 grams at 158°F (70°C)
17 min.
1773 min.
Long Term (days, weeks)
120°F (49°C)
120°F (49°C)
Short Term (minutes, hours)
158°F (70°C)
158°F (70°C)
Adhesion to stainless steel
ASTM D3330 - 90 degree, 2 mil Al foil
ASTM D3330 - 180 degree, 2 mil Al foil
- 72 hour RT
Adhesion to other surfaces
ASTM D3330 - 90 degree,
2 mil Al foil, 72 hour RT
Shear Strength - ASTM D3654
modified - (0.5 inch2 sample size)
Relative High Temperature
Operating Ranges:
Available Sizes
Roll length, width, slitting tolerance, core size.
Available Lengths
(Subject to Minimum order requirements)
3M tapes 9443NP and 9589
Standard
36 yds. (33 m)
Maximum Length
1/4 in. to 7/16 in.
180 yds. (165 m)
1/2 in. and greater
360 yds. (329 m)
Available Widths
Minimum
1/4 in. (6.35 mm)
Maximum
26 in. (660 mm)
Normal Slitting Tolerance
± 1/32 in. (0.8 mm)
Core Size
3.0 in. (76.2 mm)
-2-
3M™ Double Coated Tapes with Adhesive 700 Series
9443NP • 9589
Features
• The high density polyethylene carrier in these products is hand-tearable, and
provides dimensional stability and improved handling with ease of die-cutting
and lamination compared to adhesive transfer tapes.
• 3M™ Adhesive 760 provides high tack adhesion to a variety of substrates,
including metals, plastics and glass.
• 3M adhesive 760 provides clean removal from many surfaces.
• Tape components are in compliance with Title 21 of the code of Federal
Regulations (21 CFR) as indirect food additives.
Application Techniques
Bond strength is dependent upon the amount of adhesive-to-surface contact
developed. Firm application pressure helps develop better adhesive contact and
improves bond strength. To obtain optimum adhesion, the bonding surfaces must
be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl
alcohol or heptane.*
*Note: Carefully read and follow the manufacturer’s precautions and directions for
use when working with solvents.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
Application Ideas
• Miscellaneous joining and holding uses where high initial tack is required.
• Quick and easy tacking of carpet edges.
• General industrial mounting, joining and splicing.
Application Equipment
To apply adhesives in a wide web format, lamination equipment is required to ensure
acceptable quality. To learn more about working with pressure-sensitive adhesives
please refer to technical bulletin, Lamination Techniques for Converters of
Laminating Adhesives (70-0704-1430-8).
For additional dispenser information, contact your local 3M sales representative, or
the toll free 3M sales assistance number at 1-800-362-3550.
Storage
Store in original cartons at 70°F (21°C) and 50% relative humidity.
Shelf Life
When stored under proper conditions, product retains its performance and properties
for 18 months from date of manufacture.
-3-
3M™ Double Coated Tapes with Adhesive 700 Series
9443NP • 9589
Certification/
Recognition
FDA
The components in 3M™ Double Coated Tapes 9443NP and 9589 are in compliance with the
requirements for use as indirect food additives under Title 21 of the Code of Federal Regulations
(21 CFR). The carrier material is regulated under 21 CFR 177.1520 (c) (3.1) and (3.2) (Olefin polymers).
All of the adhesive components are regulated under 21 CFR 175.105 (Adhesives). As found in 21 CFR
175.105, there are usage restrictions associated with all adhesives used around food. As indicated in
this regulation, the adhesive must either be separated from the food by a functional barrier or used
subject to the following:
(1) In dry foods: used such that the quantity of adhesive that contacts the packaged dry food does not
exceed the limits of good manufacturing practice.
(2) In fatty and aqueous foods: the quantity of adhesive that contacts the packaged fatty and aqueous
food does not exceed the trace amount at the seams and at the edge exposure between packaging
laminates that may occur within the limits of good manufacturing practice.
It is the responsibility of the end user to ensure that his or her application is in compliance with these
usage restrictions.
Product Use
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Warranty and
Limited Remedy
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Limitation of Liability
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
ISO 9001: 2000
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards.
3
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (fax)
www.3M.com/industrial
Recycled Paper
40% pre-consumer
10% post-consumer
-4-
Printed in U.S.A.
©3M 2006 70-0705-7589-2
(7/06)